Atlanta Dogwood Festival Sponsor Tents and Displays
Atlanta Shows
Sponsor tent displays at the Atlanta Dogwood Festival: frame tents, weighted bases, sampling counters, flooring, weatherproof graphics and overnight packing.
An outdoor arts festival puts a brand in front of families, art collectors and neighbors on a relaxed day out. Sponsors at the Atlanta Dogwood Festival compete with painters, potters and food vendors for attention, so the display has to look at home among artist tents while still carrying the brand clearly, and it has to stand up to wind, sun and a sudden spring shower.
A setup we plan for this kind of festival is a 20 by 20 frame tent for a sponsor sampling a beverage. The tent has a printed valance with the brand, a fabric backwall inside the back leg line, a sampling counter with a cooler cabinet underneath, interlocking floor tiles over the grass and two potted trees at the front corners. A feather flag at the aisle side marks the tent from a distance.
Tent and ballast
A frame tent without stakes depends on weight. We plan ballast at every leg sized to the tent and the wind it might see, using water barrels or steel plates with covers so the weights look finished. Sidewalls are packed on site and go up at the back and sides when wind or rain arrives.
- Every leg gets its weight before any graphic or sidewall is attached.
- Guy points and weights are marked so the crew can retension after a gust.
- Leg covers in the brand color hide the weights and the frame hardware.
- Sidewalls roll and tie at the top of each leg so they can drop in a minute.
Tents and structures are arranged through outdoor partners, and we spec, schedule and install them. Our outdoor event structures page covers that work.
Floors, counters and shade
Grass and pavement are uneven, and a counter on soft ground leans by afternoon. Interlocking tiles give the tent a level floor and keep mud off the cooler cabinet. The counter sits on adjustable feet and is leveled on the tiles. We place it toward the front third of the tent so guests are shaded while they sample and the staff have room behind it for restocking.
Counter and floor choices start in our trade show booth design process.
Graphics that handle sun and rain
Outdoor graphics need materials that hold their color in sunlight and dry quickly. We spec dye sublimated fabric for the valance and backwall and vinyl panels for the counter wrap, with the brand large and the call to sample in short words. Art goes to print several weeks before the event so it can be test fitted to the tent frame.
File setup is covered on our exhibit graphics production page.
Power, ice and overnight
A sampling tent needs power for the cooler, lights for the counter on a gray day and sometimes a speaker. We list every device on the power plan and match it to the festival's electrical service or a quiet generator when one is permitted. Ice and product deliveries are timed for the morning before gates open.
At the end of each festival day the counter is cleared, the sidewalls go down on all sides and are zipped, and loose items are packed into lockable cases inside the tent. Our pack down leaves nothing loose for wind or passersby overnight.
Build day in the park
- The tent frame goes up on the marked spot and is weighted at every leg.
- Floor tiles are laid and leveled, then the valance and backwall are fitted.
- The counter, cooler cabinet and planters are placed.
- Power is connected and the cooler is started.
- We walk the tent with your event lead and test the sidewalls before the first guests arrive.
More on how we run installs is on our installation and dismantle page.
Fitting in among artist tents
Arts festival visitors come for the work on display, so a sponsor tent that looks like a convention booth feels out of place. We use wood counter tops, planters and soft fabric colors from your brand palette, and we keep the logo on the valance and the counter wrap rather than on every surface. If your sponsorship includes a collaboration with an Atlanta artist, a framed panel or an easel at the front gives visitors something to look at while they wait to sample.
What to send and how we close out
Send your assigned tent size and location from the sponsor agreement, what you will sample or give away, the power your equipment draws and your artwork or brand guide. On the last day the crew clears the tent, removes graphics while they are dry, breaks down the counter and floor, and drops the tent last so the weights stay on until the frame is ready to fold. Damp fabric is bagged separately and dried before it goes into storage.
Questions Exhibitors Ask
Can the tent go on grass?
Yes. We lay interlocking floor tiles over the grass and weight every leg, so nothing is staked into the ground.
What happens if it rains?
Sidewalls drop on the back and sides, the counter stays under the roof and the fabric is dried before it is packed.
Can the same tent be used at other outdoor events?
Yes. The frame, weights and floor pack into cases, and the valance can be reused or reprinted for a new campaign.
Can the setup work in a 10 by 10 space?
Yes. The counter and backwall scale down and the cooler cabinet fits under a shorter counter, though the planters and corner trees usually drop out.
Send the show, venue and booth details
Call (404) 963-0416 or send the show, the hall and your booth number and we will plan the display, the install and the teardown.